Rope and belt cutting machine绳带切割机
With our thermal cutting system it is possible to cut synthetic fabric, such as belts, bands and ropes to length. To make holes in belting fabric can also provided on special request. An electric heated blade separates, in one phase of operation, the material by heat and seals the cut edges to avoid fringing of the cut edge.
HSGM热刀切割系统为自动化绳带切割提高了高效稳定的方案，广泛使用于切割绳索、带状物、等合成纤维制品。在多年服务于纺织物、电器、机械、汽车等领域的过程中，HSGM绳带切割机结合客户工艺要求成功地开发了切割、封边、定位定型打洞、网管尾端扩孔等功能。HSGM一贯从客户关切出发，积极负责地协同客户项目要求，把每一台设备都视为自己的质量标杆。HSGM期待着为您提供满意的解决方案。
Abb 1. Blade-stand type HSG-GMN-V-E-K 型号 HSG-GMN-V-E-K
The smallest blade-stand as s straight blade, suction with a injection pipe, protection cap, quick change system for the blade, plug in electric connection and separate heat transformer.
这是最小的刀片架，可装配直刀片，通过一根注射管来抽气，保护帽，刀片快速更换系统，电插头和单独的热变换器。
Abb 2. Blade-stand type HSG-GMN-V-E/N 型号 HSG-GMN-V-E/N
The stand model has a straight blade, suction with blower, protectiom cap and foot switch, quick change system for blade(s), plug in electric connections, heat transformer with separate temperature control.
该型号配有直刀，吸风机，保护帽和脚踏开关，刀片快速更换系统，电插头，有单独的温度控制器的热变换器。
Applications：
Cuts can be assemble in kind of combined tools:
- Diagonal cuts
- Shaped cuts
- Perforation cuts
- Pressing device
- Swivel device for alternative right/diagonal with adjustable cutting-angle
对于这两个型号的应用:
切割应用包括：
- 对角线切割
- 造型切割
- 绳带穿孔
- 压力装置
- 可调整切角的可选择的旋转装置
Abb 3. Rope and belt cutting machine 绳带切割机
Function automatic:
- Material pull of from a roll or out of a barrel
- Length measure
- Piece counter
- Cutting
- Material turn off
自动的功能：
- 多种进料系统（如卷筒进料、料筒抽取等）
- 长度测量
- 块数计数
- 切割
- 进料暂停
Applications:
- Shaped cuts
- Perforation cuts
- Multiple cuts are possible below definite premise
- Blades up to 150mm belt width
- Console for the machine - height can be select
- Pressing device
- Swivel device for alternative right/diagonal with adjustable cutting-angle
- Marking device
- Printing device
- Coiling if requirement
- Uncoiling if requirement
- Plaiting device
应用：
- 造型切割
- 绳带穿孔
- 在一定前提下，可以多个切割工作同时进行
- 刀片只能切割150mm宽及以下的绳带
- 机器控制台：可以选择高度
- 压力装置
- 标记装置
- 印刷装置
- 有需要的话可以把材料卷起来
- 有需要的话可以为材料开卷
- 编织装置
